Wii Remote Troubleshooting - Steps to Fixing Wii Remote Issues

Have you been having complications with your Wiimote? Here are some troubleshooting actions that ought to get you back within the game fast! These tips will work for all Wiimote errors. Very first of all, make sure that you might have correctly set up your Wii. Double check to ensure that the sensor bar power cord is firmly attached to the back of the Wii and then chose whether you want the sensor bar to be centered above or below your television screen. This is a no brainer, but I will say it anyway: Ensure that you're making use of fresh quality name brand alkaline batteries inside the Wiimote. If you're making use of rechargeable batteries then be certain that are the new school nickel metal hydride and not old school cadmium.

1. Make certain that the Wiimote controller is a minimum of 3 to ten feet from your television set.

2. Is there anything blocking the signal the is between the Wii console itself plus the sensor bar? If there are then move them out of the way.

3. What else causes sensor bar and Wiimote not to work? Interference from other things including candles, sunlight, the glow from a fireplace too as infrared signal from any number of devices. Make certain these devices are far away from the Wii. Do you own a remote controlled automobile or plane? The radio frequency interference from these devices can interfere with correct Wiimote/sensor bar communication.
4. What other wireless toys do you might have laying around that could possibly interfere with the Wii? Hows about cordless phone? A personal computer using wireless web or wireless input devices like keyboard and mouse? Several folks overlook these basic little things that are causing your Wii not to function properly. This is just for the reason that of a simple misunderstanding of what radio frequency and infrared frequency and wireless communication can do to your home environment. Now it's my hope that you comprehend these fundamental things so that you get hours of enjoyment from your Wii console.

If after all these actions are you still having problems? If the earlier actions did not get you back inside the game here are some much more things you are able to do to get back inside the game fast! If your Wiimote is still not communicating with the Wii console, then you should get your Wii console to shake hands or get "synced" with your Wiimote once more . This might be tough if the Wiimote you're using is not the original factory problem 1 that came with your console. The reality is if the Wiimote was working and now it's not! Then you need to synchronize the Wiimote to the controller again.

Here are some much more troubleshooting steps to support you fix your Wiimote issue and get back within the game:

1. Turn the Wii console power off. Then go to the wall and unplug the power cord from the outlet. Wait about sixty seconds and then plug the power cord back within the wall.

2. Turn the power back on. In case you see a Health and Safety screen, then look for and come across the small flap on the front of your Wii console and then locate and push a little red button that says "sync" on it. Press this button and hold it down for about thirty seconds. This will need to clear all of the syncs that have taken place on your Wii. It really is like clearing a memory or resetting to factory defaults i f you will.

3. Now, after the button has been held down for a minimum of thirty seconds you can now get down to performing a re-sync with your Wiimote.

4. Now, take the Wiimote that you would like to sync and take off the battery cover and you will discover a small red button under your batteries. Press this button quickly and release it and it is best to see blinking blue lights on the front of your Wiimote.

5. Go back to the console and press then sync button under the flap once more. Then if all has worked correctly you should see a player LED has stopped blinking and this means your re-sync is done! These procedures will need to be performed for every extra Wiimote that you would like to use on your system.
0

Need Some Wii Remote Troubleshooting Assistance?

Well, as you know, there are three main competitors on the video game industry. Microsofts Xbox 360, Sonys Playstation 3, and Ninendos Wii.

Microsofts Xbox 360 has nice action games and it came a year earlier than the rest of its competitors. Sonys Playstation 3 is a powerhouse at the cost of a hefty price tag. Theres still controversy about which of both systems has better graphics, both for videogames and for playing DVDs.

The Nintendo Wii, on the other hand, doesnt equal the processing power or the graphics display of any of the other two main consoles. However, its the most popular console by far.

How can it be? Well, its cheaper for one. Its also the only console that has the Mario and Zelda series.

But most of all, its the movement. Thats what the Nintendo Wii brought to the table and it paid off. When you want your character to swing a sword, its much more satisfying to swing your own Wii remote than to press a button. Its the same for bowling, batting or any or the many activities that the Wii remote imitates.

But what happens when your Wii remote doesnt function properly? Lets say that your swings take too long to register. Your character will react and move later than you did, so it will miss the target. And in a hectic game, you cant just move a second or two in anticipation, so that your character will move in time, not to mention that it would make all the natural feeling about it disappear.

However, you dont need to spend your money in another Wii remote and throw the old one to the garbage. All you need is some basic Wii remote troubleshooting assistance. It will help you solve movement registering problems, as well as stuck buttons, jumping cursors, sticky buttons, etc. A Wii remote troubleshooting guide will also teach you how to give proper maintenance to your Wii remotes so that problems wont arise.

0

Newly Release Wii Remote White Dual USB Charging Station

As nintendo wii remote become more and more popular and it will bring more relative products hotter than before. This dual usb charging station is a good example. Here we'll take a deep introduction about this kind of charging station. You can find detail information about product description, highlights, specifications at this site!
Product Description
This Dual USB Charging Station with Battery Pack for Nintendo Wii Remote is powered by a USB cable that attaches from the AC adaptor connection (located on the back of the device) to a USB port on the Wii Console.Two sets of rechargeable 2800mAh batteries provided.It allows you could enjoy the game time as much as possible because you can charge up to 2 Wii Remotes simultaneously.There are indicate light to show the charging status which the red light shows charging,blue light then done!
Highlights
Can charge up to 2 Wii Remotes simultaneously LED charge Indicator light (red while charging, blue when done)
Two separate charging channels for each remote control
Battery covers does not block the Sync button
USB power (from any USB port)
Additional blue base light
Includes 2x 2800mAh rated battery packs and 2xbattery covers
Specification
Color: White
Dimensions: 4.0in*2.9in*3.9in
Weight: 7.4oz
What's in the Box
1 x Dual USB charging stand
1 x Charging cable
2 x 2800mAh rechargeable batteries + battery covers

What's more, another new design of wii battery charger is wii quadruple charger station. Charge the Quadruple Controller Charger Station for Nintendo Wii simultaneously to bring you game time as much as possible! This wii charger station includes four charging dock which allow you to charge and rest four remotes in an upright position. Four pieces 1800mAh rechargeable batteries along with.It is powered by a USB cable that attaches from the AC adaptor connection (located on the back of the device) to a USB port on the Wii Console.Indicate lights available,red light appears while charging,blue light shows when been done! At here, you can find morecheap Wii Accessories. Come to China to buy various products you want with lower price but good quality.

0

How to Fix Wii Remote Problems

Whenever you do this, you merely need to pay a little fee for the repair guide, there you have it. Also, it is possible to get your console repaired within a day, and even within One hour. It's done before, why can't you do it either?

The Nintendo wii gaming console is definitely the most effective gaming console on the planet and is also by far the most interactive of all game consoles and that's why the machine has such a broad appeal on the consumer market! Occasionally someone cannot locate a Wii anywhere they appear such as on the web plus retail outlets. Like I stated above the main factor that draws consumers for the Wii will be the ability to be more interactive with it greater than any other unit available on the market.

Well, the single thing about being interactive with your game console is the fact the hardware will get used a little harder compared to hardware of other gaming units. The Wii remote may be the one area of the system that gets used probably the most and because of this the remote is vulnerable to experiencing difficulity and may at one point or any other need servicing or repair. You swing the remote in most different directions then one will come loose inside or even in the worst case broken if you overlook it accidentally also it gets flung throughout the room!

Well, in case your Wii mote reduces for reasons unknown you don't to obtain that sinking feeling. I understand guess what happens I am talking about. You are aware that sinking feeling of "Oh man! I am from warranty!, How much is going to cost?, I really hope mom will not discover!" And so i know guess what happens What i'm saying is! So, pick is to check to ensure the batteries are good. I am aware that sounds simple to do which is, the actual fact of the matter is always that we sometimes lose tabs on just how long the batteries have been in the remote. Naturally, if the batteries are weak them replace them.

In the event the batteries are the rechargeable type then recharge them and make sure that they are in good order without seepage. In the event the batteries are fantastic then have a look at your controller for cracks of course, if you've num chuks then check them for breaks too.

If you can find breaks or cracks most likely this hardware will have to be replaced. Be sure that the Wii sync is functioning properly. Try this particularly when your gaming console is new.

If you need to sync your Wii then press and hold each of the buttons on the unit for around thirty seconds and view the flashing light. This should have the remote in sync with all the controller, but if it has not you will must find another troubleshooting option.

Look into the lens from the Wii remote for fingerprints and smudges that can impede the transmission between the remote and also the controller.

Needless to say if you have to send your Wii out for repairs this could end up costing big money that you may neither have or desire to spend. But there is however another choice.

The most advanced Nintendo wii repair guide available online can be the easiest, most user friendly.

0

How to do Wii Remote Troubleshooting?

Cursor (hand) or character movement not responding properly?
Hold the Wii Remote with the button side down. Without using much force, firmly tap the button side of the remote against the palm of your other hand a few times. Doing this does not take a lot of force, so be sure not to tap the Wii Remote very hard. Check for proper response. If the problem is not solved, please follow the rest of the instructions on this page.

For all Wii Remote issues:
If you are experiencing problems with a new Wii Remote, or are having difficulty with a Wii Remote that was previously working properly, please carefully read and follow the instructions on this page.

First, follow these guidelines to ensure you have set up the system properly to have theoptimal environment in which to use the Wii Remote:

Check to make sure the Sensor Bar cord is inserted into the back of the Wii console and the Sensor Bar is centered above or below your TV screen. Make sure you are using fresh batteries in the Wii Remote. The Wii Remote Controller should be used between 3 to 10 feet from the TV. Make sure no objects are blocking the signals between the Sensor Bar, the Wii console, and the Wii Remote. Check for interference from infra-red light sources, such as candles, sunlight, fireplaces, and stoves. Radio frequency interference may cause the Wii Remote to work erratically. Check for wireless devices such as cordless phones, wireless computer keyboards or mice, or other similar devices, and move or turn them off.

Still having problems? If the basic guidelines above did not solve your problem, the more specific information below may help.

Wii Remote not being recognized by the Wii Console (lights on the Wii Remote flash when you press a button, but then go out) -Most Common:Getting the Wii console to recognize (or "sync" with) a Wii Remote, especially one that did not come in the box with your Wii console, may require doing a few additional steps before it can be synced. Additionally, a Wii Remote that was working, but is no longer being recognized (or has "lost its sync") may need to be re-synced. Please use the troubleshooting steps listed below,which our experience has shown can solve many Wii Remote issues.

Try these steps!

Turn the Wii console power OFF by pressing the POWER Button on the front of the console.Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.

Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes: With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console .

When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

This sync procedure (steps "a" through "d" above) must be followed for each additional Wii Remote added to the system.

Get your Wii now by clicking here.

0

4X Quad Charge Station for Wii Remote review from CNET

Of the trio of current-generation video game consoles, only the Nintendo Wii lacks a first-party recharging solution for its controllers. If you don't want to go through an endless stream of AA batteries, that means you'll be turning to one of the increasing number of third-party charging accessories becoming available. We're still very happy with our Nyko Charging Base that can simultaneously power up to two Wii remotes and adds a nice rubber grip to the back of the controllers as well. But the 4X Quad Charge Station from Penguin United ups the ante: now you can simultaneously charge up to four remotes at once. The added capacity plus some smart design decisions makes the Penguin a contender for the best Wii controller charger to date.

The Quad Charge Station is a circular base that won't go sliding away thanks to its rubber feet. The four Wii remote docking slots are arranged in a cross-shaped pattern on the unit's topside, which is sloped upward. The bright blue LEDs under each docking slot aren't the tackiest thing we've ever come across, but in a dark room they may become distracting. Unfortunately, there's no way to turn these lights off once the charging base is plugged in, but the AC adapter cable is detachable from the base itself.

The Quad Charge Station ships with four rechargeable battery packs that snap into the battery compartment of any standard Wii remote. These battery/cover combinations are actually lighter than the standard AA batteries and battery cover they replace, and the result is a Wii controller with a slightly different weight. We detected no change in gameplay experience, but hardcore Wii fans might need awhile to adjust to the new feel.

We also though that the addition of a recessed sync button built into the back of each controller cover was a great idea, as anyone with a Wii is certainly aware that the controllers can occasionally lose their connection. While Nyko added a nice rubberized grip to the back of their battery covers, the Penguin covers feature a rigged plastic. While it's not as slippery as the original Nintendo cover, the Nyko rubber covers perform a lot better. Feel free to use the rubber Nintendo sleeves with the Penguin covers, but be warned you'll have to remove them upon charging. Wrist straps, by contrast, can be easily tucked to the side so that the charging contacts can touch.

Penguin United claims that charging four remotes simultaneously can take up to 4 hours on the Quad Charge Station. This estimate was on the money, and in our testing we were able to charge a single remote in about 2 hours. In terms of play time, Penguin says each lithium Ion battery will provide 13 hou rs of use. The remote fits very snugly into the charger--in fact, the base makes for a great way to store your remotes when not in use.

The actual contacts on the base feel a bit flimsy-- they're just a loop of thin wire. We never had any issues in our testing, but we question their durability over the long term. We really liked the charge indicators in front of each charging dock. Four green LEDs represent 25 percent increments of the battery's charge. This also comes in very handy when you just want to quickly see how much juice is left in a remote.

Overall we liked the Penguin 4X Quad Charge Station for its capability to power up four Wii remotes simultaneously, its visual charge progress indicator, and the convenience of having the batteries built into the covers. Priced at 13.99 Euro, it should be the only charging solution you'll ever need to buy. That said, if grip is among the most important details to you, and you don't plan on using more than two Wi i remotes, you may want to stick with the Nyko Charging Base, as those grip covers are among the best we've used to date.

Where to buy:

http://www.gameyeeeah.com/quad-charge-station-with-blue-light-and-pcs-1800mah-batteries-for-wii-remote-controller-p-1881.html

0

Wii Remote Troubleshooting - Guide on how to fix wii remote

Wii Remote Troubleshooting

The best part of playing Wii, in fact the center and soul of a Wii, may be the making use of the Wii remote, and sometimes you require to repair it by Wii Remote Troubleshooting. The Wii remote would be the action. It lets you transfer totally diverse than yet another player who?s accomplishing the correct exact same matter. Nintendo has invested lots of time and cash to enhance the Wii and the distant, and they've mounted lots of glitches, but it nonetheless seems like each so often you've troubles with your controller and thats when you need Wii Remote Troubleshooting.

It's achievable that the remote may be broken but try Wii Remote Troubleshooting first, don't quit until you try a few easy items initial. It is astounding how numerous issues may be mounted immediately by attempting these couple of straightforward issues.

When initial Wii Remote Troubleshooting, start off with all the batteries. Batteries which a re very low on power can cause a bunch of different issues from handle issues to button mistiming. In the event you can find the money for it, get a charging station or possibly a battery charger to maintain refreshing batteries on hand in any respect instances. When you pick up the Wii to commence enjoying, put a fresh set in correct then and take the others out and let them charge. You will be astonished how numerous complications get fastened and how a lot far better recreation play is just by undertaking that.
Needless to say, all of us don't have the funds to spend on rechargeable batteries for the sake of Wii Remote Troubleshooting, so the next best factor would be to be sure the batteries you acquire are leading top quality by a producer you have heard of. Lithium will be the latest and best battery for lengthy lifestyle, but they could be high priced, so should you can?t manage them get long-life or electronics grade alkaline batteries. They're obtaining fairly inexpensive to buy now, and can nonetheless last a decent amount of time. And when they do die, they're not as painful to via away.

Remember that batteries possess a use prior to? date on them too. Prior to you grab a 24-pack out from the bargain bin at Wal-Mart, be sure that they?re from a identify model producer, and that they?re not because of expire inside of the next month, otherwise you?re losing your funds.

In addition to batteries with Wii Remote Troubleshooting, here really are a few other factors to check. One thing that not several individuals know is that leaving the rumble characteristic switched off can truly make your Wiimote perform worse. It may well conserve the batteries, but the rumble function is element of the system, and leaving it turned off really puts a lot more strain around the controller. Another factor that's straightforward to verify is usually to make certain the sensor bar is lined up correctly and clean up. Dust on the sensor bar causes loads of difficulties.


The last step for Wii Remote Troubleshooting, alignment checks and pointer checks within the Wii Setup App to generate confident your controller is becoming observed from the sensor and so they are both looking within the very same spot.

Please see Wii Remote Troubleshooting and Wii Sync

0

Find the Easy Ways of Wii Remote Repair

Are you seeking ways of Wii remote repair. My Wii remote stopped connecting the other day. I therefore searched the Internet up and down. Fortunately, I really found some useful information for my Wii remote repair. If you have the same problem, please read the following paragraphs carefully.

First of all, check the power supply of your remote. Try changing the batteries in the Wii remote and please make sure the batteries you are using are fresh.

Then turn off your Wii console. Unplug all of the cords to the console for a few seconds. After a few seconds, plug the cords back into console again. Turn the Wii console back on and see if the problem solved. If the problem still there, please read on.

Second, check the connection of your remote. There are three steps you need to do.

1) Check if the Sensor Bar cord is plugged to the back of your console.

2) Make sure the Sensor Bar is placed in a proper place. The Sensor Bar should be placed away from interference of infra-red light sources, radio frequency. Infra-red light sources include flame from candles and fireplaces, sunlight, and electric or kerosene heaters. Radio frequency includes wireless devices such as cordless phones, wireless computer keyboards or mice, and other similar devices.

3) Make sure to use the remote in an area between 3 to 10 feet from the TV. Moreover, move away any blocks between the Sensor Bar, the Wii console, and the Wii console in this area.

All these three steps are important to Wii remote repair. You need to do them before you do any deep repair to your remote.

Third, sync or resync your remote. If your problem persists, you need to try resyncing your remote. Your remote may lose its sync after years of use. You need to resync it with your Wii console. For how to resync the remote, click and read How Do I Fix Wiimote Sync Problems.

Lastly, I would like to mention a weird way of Wii remote repair. That is to turn the Wiimote over and smack on the battery compartment of the console. Although it sounds impossible, it is reported fixing the remote issue. Maybe there is a loose connection in this compartment. Just have a try and you have nothing to lose.

More and detailed information on Wii remote repairs on Wii Fix Guide.

0

Wii Remote Troubleshooting Tips

The Nintendo Wii is an amazing gaming system that lets you get into the action instead of simply observing it. To do this, you are dependent upon the Wii remote control, which is the magic wand that enables your direct participation. When the remote isn't working properly, you don't get to play. It's an excellent idea, if you're a serious Wii gamer, to learn about Wii remote troubleshooting so you can fix problems without sending the equipment back to Nintendo for repairs. To make effective repairs on your own, you should acquire a good Wii repair guide or manual that can give you step-by-step instructions for Wiimote troubleshooting and fixing your remote, as well as other commonly encountered Wii error problems.

A Wiimote Troubleshooting Quick Tip

Before you undertake a major Wii remote troubleshooting investigation to resolve a remote malfunction, try the following fix, which seems to solve a large percentage of Wii remote issues.

G rip the Wii remote with the button side facing downward. With a very gentle force, tap the button side of the remote against your other hand several times, and then see if it operates properly. If you're lucky, you'll have a working remote. If this simple process does not fix the problem, don't despair, but continue below.

Basic Wii Remote Operating Guidelines

If the previous quick fix didn't work to resolve your Wii remote problem, run through the following Wii remote troubleshooting list to ensure that you have set up your system correctly to provide the optimal environment in which the Wii remote can function.

* Ensure that the Sensor Bar cord is plugged into the rear of the Wii console and that the Sensor Bar is centered above or below your television screen.
* Ensure that there are fresh batteries in the Wii Remote.
* Stay within 3 to 10 feet of the television set when using the Wii Remote Controller.
* Ensure that nothing is blocking signals between the Sensor Bar, the Wii console, and the Wii Remote.
* Check for interference from infra-red light sources, such as sunlight, candles, stoves, and fireplaces.
* Check for wireless devices in the area. Cordless phones, wireless computer keyboards or mice, or other similar devices can cause radio wave interference. Move them or turn them off.

< p>Preparing to Synchronize the System

If the setup, described above, did not solve your problem it's possible that the Wii console does not recognize your remote. An indication that this is the case is when you press a button, the remote flashes and then goes out. This is a common problem that can be easily fixed. There are many reasons that a console may not recognize a remote. It could be a new remote, it could be a remote normally configured for another Wii system, or it could be that the original remote has somehow gotten out of sync with the Wii system. The Wii remote troubleshooting steps given below have been known to resolve most of these recognition problems.

1. Press the POWER button on the front of the Wii console to turn off the power. Unplug the power cord from the wall outlet, wait a few seconds, and plug it in again.
2. Press the POWER button to turn the console back on. When the Health and Safety screen displays, open the s mall flap on the front of the console and press and hold the red button labeled SYNC. Hold the SYNC Button down for 15 seconds. This clears all syncs on the Wii, giving you a fresh start to re-synchronize the system.

Synchronizing the Remote

Perform the following tasks for each Wii remote that you wish to synchronize.

1. Remove the battery cover on the back of the remote.
2. Locate the small red button just below the batteries.
3. Press and release the red button. This will cause the blue lights on the front of the remote to blink.
4. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console.
5. When the Player LED stops blinking stops and remains lit, syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

This sync procedures described above must be followed for each additional Wii Remote added to the system. If you'd lik e additional information about Wii remote troubleshooting and repairing your remotes and your Wii system, go online and find a good Wii repair guide. It will save you a lot of money, time, and grief in the future.

0

Wii Remote Troubleshooting Tips

The Nintendo Wii is an amazing gaming system that lets you get into the action instead of simply observing it. To do this, you are dependent upon the Wii remote control, which is the magic wand that enables your direct participation. When the remote isn't working properly, you don't get to play. It's an excellent idea, if you're a serious Wii gamer, to learn about Wii remote troubleshooting so you can fix problems without sending the equipment back to Nintendo for repairs. To make effective repairs on your own, you should acquire a good Wii repair guide or manual that can give you step-by-step instructions for Wiimote troubleshooting and fixing your remote, as well as other commonly encountered Wii error problems.

A Wiimote Troubleshooting Quick Tip

Before you undertake a major Wii remote troubleshooting investigation to resolve a remote malfunction, try the following fix, which seems to solve a large percentage of Wii remote issues.

G rip the Wii remote with the button side facing downward. With a very gentle force, tap the button side of the remote against your other hand several times, and then see if it operates properly. If you're lucky, you'll have a working remote. If this simple process does not fix the problem, don't despair, but continue below.

Basic Wii Remote Operating Guidelines

If the previous quick fix didn't work to resolve your Wii remote problem, run through the following Wii remote troubleshooting list to ensure that you have set up your system correctly to provide the optimal environment in which the Wii remote can function.

* Ensure that the Sensor Bar cord is plugged into the rear of the Wii console and that the Sensor Bar is centered above or below your television screen.
* Ensure that there are fresh batteries in the Wii Remote.
* Stay within 3 to 10 feet of the television set when using the Wii Remote Controller.
* Ensure that nothing is blocking signals between the Sensor Bar, the Wii console, and the Wii Remote.
* Check for interference from infra-red light sources, such as sunlight, candles, stoves, and fireplaces.
* Check for wireless devices in the area. Cordless phones, wireless computer keyboards or mice, or other similar devices can cause radio wave interference. Move them or turn them off.

< p>Preparing to Synchronize the System

If the setup, described above, did not solve your problem it's possible that the Wii console does not recognize your remote. An indication that this is the case is when you press a button, the remote flashes and then goes out. This is a common problem that can be easily fixed. There are many reasons that a console may not recognize a remote. It could be a new remote, it could be a remote normally configured for another Wii system, or it could be that the original remote has somehow gotten out of sync with the Wii system. The Wii remote troubleshooting steps given below have been known to resolve most of these recognition problems.

1. Press the POWER button on the front of the Wii console to turn off the power. Unplug the power cord from the wall outlet, wait a few seconds, and plug it in again.
2. Press the POWER button to turn the console back on. When the Health and Safety screen displays, open the s mall flap on the front of the console and press and hold the red button labeled SYNC. Hold the SYNC Button down for 15 seconds. This clears all syncs on the Wii, giving you a fresh start to re-synchronize the system.

Synchronizing the Remote

Perform the following tasks for each Wii remote that you wish to synchronize.

1. Remove the battery cover on the back of the remote.
2. Locate the small red button just below the batteries.
3. Press and release the red button. This will cause the blue lights on the front of the remote to blink.
4. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console.
5. When the Player LED stops blinking stops and remains lit, syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

This sync procedures described above must be followed for each additional Wii Remote added to the system. If you'd lik e additional information about Wii remote troubleshooting and repairing your remotes and your Wii system, go online and find a good Wii repair guide. It will save you a lot of money, time, and grief in the future.

0

Wii Remote Troubleshooting Tips

The Nintendo Wii is an amazing gaming system that lets you get into the action instead of simply observing it. To do this, you are dependent upon the Wii remote control, which is the magic wand that enables your direct participation. When the remote isn't working properly, you don't get to play. It's an excellent idea, if you're a serious Wii gamer, to learn about Wii remote troubleshooting so you can fix problems without sending the equipment back to Nintendo for repairs. To make effective repairs on your own, you should acquire a good Wii repair guide or manual that can give you step-by-step instructions for Wiimote troubleshooting and fixing your remote, as well as other commonly encountered Wii error problems.

A Wiimote Troubleshooting Quick Tip

Before you undertake a major Wii remote troubleshooting investigation to resolve a remote malfunction, try the following fix, which seems to solve a large percentage of Wii remote issues.

G rip the Wii remote with the button side facing downward. With a very gentle force, tap the button side of the remote against your other hand several times, and then see if it operates properly. If you're lucky, you'll have a working remote. If this simple process does not fix the problem, don't despair, but continue below.

Basic Wii Remote Operating Guidelines

If the previous quick fix didn't work to resolve your Wii remote problem, run through the following Wii remote troubleshooting list to ensure that you have set up your system correctly to provide the optimal environment in which the Wii remote can function.

* Ensure that the Sensor Bar cord is plugged into the rear of the Wii console and that the Sensor Bar is centered above or below your television screen.
* Ensure that there are fresh batteries in the Wii Remote.
* Stay within 3 to 10 feet of the television set when using the Wii Remote Controller.
* Ensure that nothing is blocking signals between the Sensor Bar, the Wii console, and the Wii Remote.
* Check for interference from infra-red light sources, such as sunlight, candles, stoves, and fireplaces.
* Check for wireless devices in the area. Cordless phones, wireless computer keyboards or mice, or other similar devices can cause radio wave interference. Move them or turn them off.

< p>Preparing to Synchronize the System

If the setup, described above, did not solve your problem it's possible that the Wii console does not recognize your remote. An indication that this is the case is when you press a button, the remote flashes and then goes out. This is a common problem that can be easily fixed. There are many reasons that a console may not recognize a remote. It could be a new remote, it could be a remote normally configured for another Wii system, or it could be that the original remote has somehow gotten out of sync with the Wii system. The Wii remote troubleshooting steps given below have been known to resolve most of these recognition problems.

1. Press the POWER button on the front of the Wii console to turn off the power. Unplug the power cord from the wall outlet, wait a few seconds, and plug it in again.
2. Press the POWER button to turn the console back on. When the Health and Safety screen displays, open the s mall flap on the front of the console and press and hold the red button labeled SYNC. Hold the SYNC Button down for 15 seconds. This clears all syncs on the Wii, giving you a fresh start to re-synchronize the system.

Synchronizing the Remote

Perform the following tasks for each Wii remote that you wish to synchronize.

1. Remove the battery cover on the back of the remote.
2. Locate the small red button just below the batteries.
3. Press and release the red button. This will cause the blue lights on the front of the remote to blink.
4. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console.
5. When the Player LED stops blinking stops and remains lit, syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

This sync procedures described above must be followed for each additional Wii Remote added to the system. If you'd lik e additional information about Wii remote troubleshooting and repairing your remotes and your Wii system, go online and find a good Wii repair guide. It will save you a lot of money, time, and grief in the future.

0

Guides to Syncing Wii Remote Controller

With the Wii Remote controller, gaming becomes accessible to everyone. Thanks to advanced motion-sensing technology, with the emergence of Wii Remote Controller, game control is as easy as swinging a tennis racket, or steering a wheel. The Wii Remote controller also packs a speaker, rumble feature, and external connector for other input devices, like the Nunchuk and the Classic Controller.

Well, maybe not every one is familiar with how to connect a new wii remote controller to the console. I used to be stuck by this challenge. Before I used to test video games for a living, I used to become so frustrated with connecting a new Wii Remote to the console. When you've never synced a new Wii Remote to your system or you haven't used it in a while, you can use your other Wii Remotes to connect it the old fashioned way, or you can use my simple steps and make your friends think you're some kind of Nintendo wizard.

Turn on your Wii console. While on the HOME screen, press any button on the Wii Remote. If the 4 squares on the bottom remain dark, change the batteries (or for a rechargeable Wii Remote, place it on the charger for a while).

If the 4 squares blink blue, then stop, your Wii Remote is not synced. Press the 1 and 2 buttons at the same time. This should connect your Wii Remote if it's been synced before.

If your 4 squares still blink blue, then stop, these last steps will do the trick. First, on the front of the Wii console, just underneath the disc slot, there is a small panel that opens down. Open it and press the small red button.

Open the battery panel of your Wii Remote and press the small red button. Replace the battery panel and observe the blinking blue lights. If 3 stop blinking, and 1 remains lit blue, your Wii Remote is synced with your console. Make sure to secure the wrist strap, and have fun!

If you wanna Nintendo wii accessories like wii remote controller such like wired controller wii, Topons on online marketplace must be your perfect choice.

Source by http://blog.topons.com/index.php/2010/09/guides-to-syncing-wii-remote-controller/

0

Wii Remote Controller, Game's Shortcut for Excitement

Games are many things to different people. Some see games as gateways to an unknown universe while others see them as extensions of the world around them. Nintendo created Wii to fit everyone's ideal break away from the everyday. The wireless, freehand Wii Remote controller not only makes games easy to play, it makes them more fun than ever before. Accentuating the sense of touch in the game lets you feel the heat of emotion with each movement.

It appears that Nintendo isn't the only one banking on New Super Mario Bros. Wii being a big hit this holiday season. GoNintendo received a press release from third-party peripheral manufacturer PDF earlier today, showing off the above New Super Mario Bros. Wii-branded controller shells, along with some NERF sports shells and a Wii Energizer All-in-One Charger.
The product description reads as follows:

Super Mario Bros. Wii Classic Grip
What it is: The new Super Mario Bros. Classic Grip is a plastic, ergonomic grip that clips securely on top of a Wii remote. It features enlarged action buttons and an enlarged D-pad that are activated by pass-through mechanisms.
Consumer Benefit: The Wii Classic Grip provides a better ergonomic shape when the wired controller Wii is being used as a classic controller, and retains that "classic feel" that ties into the nostalgia of Super Mario Bros.

Of course, not unlike what they've done with professor Layton and the Diabolical Box and other items, GameStop is charming more than the above-listed.

As you can see in the image above, the shells are designed to come in colors representing Mario, Luigi, the blue Toad, the yellow Toad, and even Yoshi, in case there's a renegade in the group.
There has been a fair bit of discussion about the items of Nintendo wii games accessories on the NeoGaF forums, and one user created the following image to display how the Wii Remote fits inside the shell:

Personally speaking, I'm just a little uneasy with how the 1 and 2 buttons on the shell overlap with the corresponding buttons on the Wii Remote. It reminds me a lot of the early complaints about the PlayStation Portable's square button not functioning properly, as it didn't quite overlay flush with the sensor beneath.
On the other hand, I've never really had a problem with my PSP's square button, either, so that's probably a moot point. The only other thing is the diagonal orientation itself; I've always preferred the more natural setup used by the Super NES and the Nintendo 64, in which the buttons slant the opposite way.
Why they chose to abandon that, I may never know. But even so, that doesn't seem like a deal breaker; I've had plenty of time to adjust with the GameCube, Game Boy Advance, Wii Classic Controller, and some DS titles.
After all that, though, the question remains: do I really need this? Probably not; I'm quite comfortable just using the Wii controller a la cart. Nonetheless, I know there are plenty of people who aren't as comfortable with a bare Wii Remote-as-an-NES-controller style, and this will probably be a good item for them. Heck, it might even make some people give Wario Land: Shake It!! a second glance.
Doesn't mean I wouldn't like one, however.
What's your verdict, folks? Will anyone be getting one of these?

Source by http://blog.topons.com/index.php/2010/09/wii-remote-controller-game's-shortcut-for-excitement/

0